INSTALL 17.4 KB
Newer Older
mmn's avatar
mmn committed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
TABLE OF CONTENTS
=================
* Prerequisites
    - PHP modules
    - Better performance
* Installation
    - Getting it up and running
    - Fancy URLs
    - Sphinx
    - SMS
    - Queues and daemons
    - Themes
    - Translation
    - Backups
    - Private

17 18 19
Prerequisites
=============

mmn's avatar
mmn committed
20 21 22
PHP modules
-----------

23 24 25
The following software packages are *required* for this software to
run correctly.

26
- PHP 5.4+      For newer versions, some functions that are used may be
27 28
                disabled by default, such as the pcntl_* family. See the
                section on 'Queues and daemons' for more information.
mmn's avatar
mmn committed
29
- MariaDB 5+    GNU Social uses, by default, a MariaDB server for data
30 31 32 33 34 35 36 37 38 39
                storage. Versions 5.x and 10.x have both reportedly
                worked well. It is also possible to run MySQL 5.x.
- Web server    Apache, lighttpd and nginx will all work. CGI mode is
                recommended and also some variant of 'suexec' (or a
                proper setup php-fpm pool)
                NOTE: mod_rewrite or its equivalent is extremely useful.

Your PHP installation must include the following PHP extensions for a
functional setup of GNU Social:

40
- openssl       (compiled in for Debian, enabled manually in Arch Linux)
mmn's avatar
mmn committed
41 42 43 44 45 46 47 48 49 50
- php5-curl     Fetching files by HTTP.
- php5-gd       Image manipulation (scaling).
- php5-gmp      For Salmon signatures (part of OStatus).
- php5-json     For WebFinger lookups and more.
- php5-mysqlnd  The native driver for PHP5 MariaDB connections. If you
                  use MySQL, 'mysql' or 'mysqli' may work.

The above package names are for Debian based systems. In the case of
Arch Linux, PHP is compiled with support for most extensions but they
require manual enabling in the relevant php.ini file (mostly php5-gmp).
51 52 53

Better performance
------------------
54 55 56

For some functionality, you will also need the following extensions:

57 58 59
- opcache       Improves performance a _lot_. Included in PHP, must be
                enabled manually in php.ini for most distributions. Find
                and set at least:  opcache.enable=1
60 61 62 63 64 65 66
- mailparse     Efficient parsing of email requires this extension.
                Submission by email or SMS-over-email uses this.
- sphinx        A client for the sphinx server, an alternative to MySQL
                or Postgresql fulltext search. You will also need a
                Sphinx server to serve the search queries.
- gettext       For multiple languages. Default on many PHP installs;
                will be emulated if not present.
67
- exif          For thumbnails to be properly oriented.
68

mmn's avatar
mmn committed
69 70 71
You may also experience better performance from your site if you configure
a PHP cache/accelerator. Most distributions come with "opcache" support.
Enable it in your php.ini, it is documented there together with its settings.
72 73 74 75

Installation
============

mmn's avatar
mmn committed
76 77 78
Getting it up and running
-------------------------

79 80
Installing the basic GNU Social web component is relatively easy,
especially if you've previously installed PHP/MariaDB packages.
81 82 83 84

1. Unpack the tarball you downloaded on your Web server. Usually a
   command like this will work:

85
       tar zxf gnusocial-*.tar.gz
86

87
   ...which will make a gnusocial-x.y.z subdirectory in your current
88 89 90 91 92 93 94
   directory. (If you don't have shell access on your Web server, you
   may have to unpack the tarball on your local computer and FTP the
   files to the server.)

2. Move the tarball to a directory of your choosing in your Web root
   directory. Usually something like this will work:

95
       mv gnusocial-x.y.z /var/www/gnusocial
96

97 98 99 100 101 102 103 104 105 106
   This will often make your GNU Social instance available in the gnusocial
   path of your server, like "http://example.net/gnusocial". "social" or
   "blog" might also be good path names. If you know how to configure 
   virtual hosts on your web server, you can try setting up
   "http://social.example.net/" or the like.

   If you have "rewrite" support on your webserver, and you should,
   then please enable this in order to make full use of your site. This
   will enable "Fancy URL" support, which you can read more about if you
   scroll down a bit in this document.
107 108 109

3. Make your target directory writeable by the Web server.

110
       chmod a+w /var/www/gnusocial/
111 112 113

   On some systems, this will probably work:

114 115
       chgrp www-data /var/www/gnusocial/
       chmod g+w /var/www/gnusocial/
116 117 118

   If your Web server runs as another user besides "www-data", try
   that user's default group instead. As a last resort, you can create
119
   a new group like "gnusocial" and add the Web server's user to the group.
120 121 122 123 124

4. You should also take this moment to make your avatar, background, and
   file subdirectories writeable by the Web server. An insecure way to do
   this is:

125 126 127
       chmod a+w /var/www/gnusocial/avatar
       chmod a+w /var/www/gnusocial/background
       chmod a+w /var/www/gnusocial/file
128 129 130 131

   You can also make the avatar, background, and file directories
   writeable by the Web server group, as noted above.

132
5. Create a database to hold your site data. Something like this
133 134
   should work:

135
       mysqladmin -u "root" --password="rootpassword" create gnusocial
136

137 138
   Note that GNU Social should have its own database; you should not share
   the database with another program. You can name it whatever you want,
139 140 141
   though.

   (If you don't have shell access to your server, you may need to use
142 143
   a tool like phpMyAdmin to create a database. Check your hosting
   service's documentation for how to create a new MariaDB database.)
144

145
6. Create a new database account that GNU Social will use to access the
146
   database. If you have shell access, this will probably work from the
147
   MariaDB shell:
148

149 150 151
       GRANT ALL on gnusocial.*
       TO 'gnusocial'@'localhost'
       IDENTIFIED BY 'agoodpassword';
152

153 154 155
   You should change the user identifier 'gnusocial' and 'agoodpassword'
   to your preferred new database username and password. You may want to
   test logging in to MariaDB as this new user.
156

157
7. In a browser, navigate to the GNU Social install script; something like:
158

159
       http://social.example.net/install.php
160 161 162 163 164

   Enter the database connection information and your site name. The
   install program will configure your site and install the initial,
   almost-empty database.

165 166 167
8. You should now be able to navigate to your social site's main directory
   and see the "Public Timeline", which will probably be empty. You can
   now register new user, post some notices, edit your profile, etc.
168 169 170 171

Fancy URLs
----------

172 173
By default, GNU Social will use URLs that include the main PHP program's
name in them. For example, a user's home profile might be found at:
174

175
    http://example.net/gnusocial/index.php/gnusocial/fred
176 177 178 179

On certain systems that don't support this kind of syntax, they'll
look like this:

180
    http://example.net/gnusocial/index.php?p=gnusocial/fred
181 182 183

It's possible to configure the software so it looks like this instead:

184
    http://example.net/gnusocial/fred
185 186 187 188

These "fancy URLs" are more readable and memorable for users. To use
fancy URLs, you must either have Apache 2.x with .htaccess enabled and
mod_rewrite enabled, -OR- know how to configure "url redirection" in
189
your server (like lighttpd or nginx).
190 191

1. Copy the htaccess.sample file to .htaccess in your StatusNet
192
   directory.
193 194

2. Change the "RewriteBase" in the new .htaccess file to be the URL path
195 196 197
   to your GNU Social installation on your server. Typically this will
   be the path to your GNU Social directory relative to your Web root.
   If you are installing it in the root directory, leave it as '/'.
198

199
3. Add, uncomment or change a line in your config.php file so it says:
200 201 202 203 204 205

       $config['site']['fancy'] = true;

You should now be able to navigate to a "fancy" URL on your server,
like:

206
    http://example.net/gnusocial/main/register
207 208 209 210

If you changed your HTTP server configuration, you may need to restart
the server first.

211
If it doesn't work, double-check that AllowOverride for the GNU Social
212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291
directory is 'All' in your Apache configuration file. This is usually
/etc/httpd.conf, /etc/apache/httpd.conf, or (on Debian and Ubuntu)
/etc/apache2/sites-available/default. See the Apache documentation for
.htaccess files for more details:

    http://httpd.apache.org/docs/2.2/howto/htaccess.html

Also, check that mod_rewrite is installed and enabled:

    http://httpd.apache.org/docs/2.2/mod/mod_rewrite.html

Sphinx
------

To use a Sphinx server to search users and notices, you'll need to
enable the SphinxSearch plugin. Add to your config.php:

    addPlugin('SphinxSearch');
    $config['sphinx']['server'] = 'searchhost.local';

You also need to install, compile and enable the sphinx pecl extension for
php on the client side, which itself depends on the sphinx development files.

See plugins/SphinxSearch/README for more details and server setup.

SMS
---

StatusNet supports a cheap-and-dirty system for sending update messages
to mobile phones and for receiving updates from the mobile. Instead of
sending through the SMS network itself, which is costly and requires
buy-in from the wireless carriers, it simply piggybacks on the email
gateways that many carriers provide to their customers. So, SMS
configuration is essentially email configuration.

Each user sends to a made-up email address, which they keep a secret.
Incoming email that is "From" the user's SMS email address, and "To"
the users' secret email address on the site's domain, will be
converted to a notice and stored in the DB.

For this to work, there *must* be a domain or sub-domain for which all
(or most) incoming email can pass through the incoming mail filter.

1. Run the SQL script carrier.sql in your StatusNet database. This will
   usually work:

       mysql -u "statusnetuser" --password="statusnetpassword" statusnet < db/carrier.sql

   This will populate your database with a list of wireless carriers
   that support email SMS gateways.

2. Make sure the maildaemon.php file is executable:

       chmod +x scripts/maildaemon.php

   Note that "daemon" is kind of a misnomer here; the script is more
   of a filter than a daemon.

2. Edit /etc/aliases on your mail server and add the following line:

       *: /path/to/statusnet/scripts/maildaemon.php

3. Run whatever code you need to to update your aliases database. For
   many mail servers (Postfix, Exim, Sendmail), this should work:

       newaliases

   You may need to restart your mail server for the new database to
   take effect.

4. Set the following in your config.php file:

       $config['mail']['domain'] = 'yourdomain.example.net';



Queues and daemons
------------------

Some activities that StatusNet needs to do, like broadcast OStatus, SMS,
292 293 294 295 296 297 298 299 300 301 302 303 304 305
XMPP messages and TwitterBridge operations, can be 'queued' and done by
off-line bots instead.

Two mechanisms are available to achieve offline operations:

* New embedded OpportunisticQM plugin, which is enabled by default
* Legacy queuedaemon script, which can be enabled via config file.

### OpportunisticQM plugin

This plugin is enabled by default. It tries its best to do background
job during regular HTTP requests, like API or HTML pages calls.

Since queueing system is enabled by default, notices to be broadcasted
mmn's avatar
mmn committed
306
will be stored, by default, into DB (table queue_item).
307

308
Each time it can, OpportunisticQM will try to handle some of them.
309

mmn's avatar
mmn committed
310
This is a good solution whether you:
311 312

* have no access to command line (shared hosting)
mmn's avatar
mmn committed
313 314
* do not want to deal with long-running PHP processes
* run a low traffic GNU social instance
315

mmn's avatar
mmn committed
316
In other case, you really should consider enabling the queuedaemon for
mmn's avatar
mmn committed
317 318
performance reasons. Background daemons are necessary anyway if you wish
to use the Instant Messaging features such as communicating via XMPP.
319 320 321 322 323 324 325 326

### queuedaemon

If you want to use legacy queuedaemon, you must be able to run
long-running offline processes, either on your main Web server or on
another server you control. (Your other server will still need all the
above prerequisites, with the exception of Apache.) Installing on a
separate server is probably a good idea for high-volume sites.
327 328 329 330

1. You'll need the "CLI" (command-line interface) version of PHP
   installed on whatever server you use.

331 332 333 334 335 336 337 338
   Modern PHP versions in some operating systems have disabled functions
   related to forking, which is required for daemons to operate. To make
   this work, make sure that your php-cli config (/etc/php5/cli/php.ini)
   does NOT have these functions listed under 'disable_functions':

       * pcntl_fork, pcntl_wait, pcntl_wifexited, pcntl_wexitstatus,
         pcntl_wifsignaled, pcntl_wtermsig

339 340 341 342
   Other recommended settings for optimal performance are:
       * mysqli.allow_persistent = On
       * mysqli.reconnect = On

343 344 345 346 347 348 349 350 351
2. If you're using a separate server for queues, install StatusNet
   somewhere on the server. You don't need to worry about the
   .htaccess file, but make sure that your config.php file is close
   to, or identical to, your Web server's version.

3. In your config.php files (both the Web server and the queues
   server!), set the following variable:

       $config['queue']['enabled'] = true;
352
       $config['queue']['daemon'] = true;
353 354 355 356 357 358 359 360 361 362 363 364

   You may also want to look at the 'daemon' section of this file for
   more daemon options. Note that if you set the 'user' and/or 'group'
   options, you'll need to create that user and/or group by hand.
   They're not created automatically.

4. On the queues server, run the command scripts/startdaemons.sh.

This will run the queue handlers:

* queuedaemon.php - polls for queued items for inbox processing and
  pushing out to OStatus, SMS, XMPP, etc.
365
* imdaemon.php - if an IM plugin is enabled (like XMPP)
366
* other daemons, like TwitterBridge ones, that you may have enabled
367

368
These daemons will automatically restart in most cases of failure
369 370 371 372 373 374 375 376
including memory leaks (if a memory_limit is set), but may still die
or behave oddly if they lose connections to the XMPP or queue servers.

It may be a good idea to use a daemon-monitoring service, like 'monit',
to check their status and keep them running.

All the daemons write their process IDs (pids) to /var/run/ by
default. This can be useful for starting, stopping, and monitoring the
377 378 379
daemons. If you are running multiple sites on the same machine, it will
be necessary to avoid collisions of these PID files by setting a site-
specific directory in config.php:
380

381
       $config['daemon']['piddir'] = __DIR__ . '/../run/';
382

383 384 385
It is also possible to use a STOMP server instead of our kind of hacky
home-grown DB-based queue solution. This is strongly recommended for
best response time, especially when using XMPP.
386 387 388 389

Themes
------

390 391 392
Older themes (version 0.9.x and below) no longer work with StatusNet
1.0.x, due to major changes in the site layout. We ship with three new
themes for this version, 'neo', 'neo-blue' and 'neo-light'.
393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443

As of right now, your ability to change the theme is site-wide; users
can't choose their own theme. Additionally, the only thing you can
change in the theme is CSS stylesheets and some image files; you can't
change the HTML output, like adding or removing menu items.

You can choose a theme using the $config['site']['theme'] element in
the config.php file. See below for details.

You can add your own theme by making a sub-directory of the 'theme'
subdirectory with the name of your theme. Each theme can have the
following files:

display.css: a CSS2 file for "default" styling for all browsers.
logo.png: a logo image for the site.
default-avatar-profile.png: a 96x96 pixel image to use as the avatar for
    users who don't upload their own.
default-avatar-stream.png: Ditto, but 48x48. For streams of notices.
default-avatar-mini.png: Ditto ditto, but 24x24. For subscriptions
    listing on profile pages.

You may want to start by copying the files from the default theme to
your own directory.

Translation
-----------

Translations in StatusNet use the gettext system <http://www.gnu.org/software/gettext/>.
Theoretically, you can add your own sub-directory to the locale/
subdirectory to add a new language to your system. You'll need to
compile the ".po" files into ".mo" files, however.

Contributions of translation information to StatusNet are very easy:
you can use the Web interface at translatewiki.net to add one
or a few or lots of new translations -- or even new languages. You can
also download more up-to-date .po files there, if you so desire.

For info on helping with translations, see http://status.net/wiki/Translations

Backups
-------

There is no built-in system for doing backups in StatusNet. You can make
backups of a working StatusNet system by backing up the database and
the Web directory. To backup the database use mysqldump <http://ur1.ca/7xo>
and to backup the Web directory, try tar.

Private
-------

The administrator can set the "private" flag for a site so that it's
444 445 446 447 448
not visible to non-logged-in users. (This is the default for new installs of version 1.0!)

This might be useful for workgroups who want to share a social
networking site for project management, but host it on a public
server.
449

450 451
Total privacy is attempted but not guaranteed or ensured. Private sites
currently don't work well with OStatus federation.
452 453

Access to file attachments can also be restricted to logged-in users only.
454

455 456 457 458 459 460 461 462 463 464 465 466 467 468
1. Add a directory outside the web root where your file uploads will be
   stored. Usually a command like this will work:

       mkdir /var/www/statusnet-files

2. Make the file uploads directory writeable by the web server. An
   insecure way to do this is:

       chmod a+x /var/www/statusnet-files

3. Tell StatusNet to use this directory for file uploads. Add a line
   like this to your config.php:

       $config['attachments']['dir'] = '/var/www/statusnet-files';